CdS nanowire (NW) ring cavities were fabricated and studied for the first time. The rings with radii from 2.1 to 5.9 mu m were fabricated by a nanoprobe system installed in a scanning electron microscope. Radius dependent whispering gallery modes (WGMs) were observed. A straight CdS NW with Fabry-Perot (F-P) cavity structure was fabricated and placed by the side of a NW ring cavity to form 6 coupled ring-F-P cavity. When the NW ring was excited by a focused laser, a bright green light spot was observed at the output end of the straight NW, indicating that the latter had served as an effect waveguide to couple the light out from the ring cavity. The corresponding light spectrum showed that the WGMs had been modulated. We confirmed that the NW F-P cavity had served as a modulator. Such a coupled cavity has potential application in a nanophotonic system.
The chemical composition of secondary organic aerosol (SOA) particles, formed by the dark ozonolysis of alpha-pinene, was characterized by a high-resolution time-of-flight aerosol mass spectrometer. The experiments were conducted using a continuous-flow chamber, allowing the particle mass loading and chemical composition to be maintained for several days. The organic portion of the particle mass loading was varied from 0.5 to >140 mu g/m(3) by adjusting the concentration of reacted alpha-pinene from 0.9 to 91.1 ppbv. The mass spectra of the organic material changed with loading. For loadings below 5 mu g/m(3) the unit-mass-resolution m/z 44 (CO2+) signal intensity exceeded that of m/z 43 ( predominantly C2H3O+), suggesting more oxygenated organic material at lower loadings. The composition varied more for lower loadings (0.5 to 15 mu g/m(3)) compared to higher loadings (15 to >140 mu g/m(3)). The high-resolution mass spectra showed that from >140 to 0.5 mu g/m(3) the mass percentage of fragments containing carbon and oxygen (CxHyOz+) monotonically increased from 48% to 54%. Correspondingly, the mass percentage of fragments representing CxHy+ decreased from 52% to 46%, and the atomic oxygen-to-carbon ratio increased from 0.29 to 0.45. The atomic ratios were accurately parameterized by a four-product basis set of decadal volatility (viz. 0.1, 1.0, 10, 100 mu g/m(3)) employing products having empirical formulas of C1H1.32O0.48, C1H1.36O0.39, C1H1.57O0.24, and C1H1.76O0.14. These findings suggest considerable caution is warranted in the extrapolation of laboratory results that were obtained under conditions of relatively high loading (i.e., >15 mu g/m(3)) to modeling applications relevant to the atmosphere, for which loadings of 0.1 to 20 mu g/m(3) are typical. For the lowest loadings, the particle mass spectra resembled observations reported in the literature for some atmospheric particles.
Long-range surface plasmon polariton (LRSPP) modes in an asymmetrical system, in which the thin metal film is sandwiched between a semi-infinite substrate and a high permittivity polymer film with a finite thickness, are theoretically calculated and analyzed. Due to the high permittivity of the polymer film, at proper polymer film thicknesses, the index-matching condition of the dielectrics at both sides of the metal can be satisfied for supporting LRSPP modes, and the electromagnetic field above the metal can be localized well. It is found that these LRSPP modes have both long propagation lengths and subwavelength mode expansion above the metal at the optimal polymer film thicknesses. Furthermore, the requirements on the refractive index and the thickness of the polymer film to support LRSPP modes at the optimal thicknesses are found to be not critical.
The spatio-temporal varying characteristics of dissolved inorganic nitrogen, reactive phosphate (RP), chemical oxygen demand (COD), and dissolving oxygen (DO) in Tianjin coastal seawater were investigated based on observation from May 1996 to October 2006. The concentrations of dissolved inorganic nitrogen (DIN), RP and COD ascended gradually and their varying ranges were 0.103–2.432, 0.009–0.12, and 0.8–2.9 mg L−1, respectively. While DO in seawater decreased from 8.9 to 6.1 mg L−1 gradually. Those indicated that human-induced eutrophication occurred and the seawater quality deteriorated. The spatial distributions of DIN, RP and COD were largely uniform, where isopleths generally descended from estuarine zones and bays to the central areas and from northern area to southern area, indicating that continental input is the dominant source of those pollutants. Especially, peak zones of those pollutants usually appeared near estuaries, Tianjin harbors, and dumping site of dredged sediment, which indicates that the urban and industrial sewage, shipping waste, dredged soil were the main sources for those contaminants in seawater.
A dielectric-loaded (DL) waveguide is an attractive possibility for interaction circuits with high-power sources in the millimeter-wave regime down to tenths of millimeters, particularly for gyrotron-traveling-wave-tube amplifiers (gyro-TWTs). We present results on a systematic investigation of the influence of the periodically loaded lossy dielectric on the propagation characteristics of the operating modes, which reveals that a complex mode in the periodic system can be mapped to a corresponding mode in an empty waveguide or a uniform DL waveguide. Dielectric losses not only induce modal transitions between different modes with similar field structures and close phase velocities in the uniform system but also unify the discrete mode spectrum into a continuous spectrum in the periodic system. Since the lossy dielectric functions as a power sink, the higher order Bloch harmonic components arising from the structural periodicity are suppressed, and the mode spectrum of the lossy periodic system degenerates into that of an empty waveguide. This alleviates the potential danger of spurious oscillations induced by the higher order harmonic components, making the periodic lossy DL waveguide promising in a high-power millimeter-wave gyro-TWT