Methanesulfonate, an important oxidation product of dimethyl sulfide, is abundant in marine aerosol particles. However, its impact on the cloud condensation nucleation (CCN) activity of marine aerosol is yet to be elucidated, largely because the CCN activity of methanesulfonate has been seldom investigated. In this work, we measured the CCN activities of three common methanesulfonates, and the single hygroscopicity parameters (κ) were determined to be 0.46 ± 0.02 for sodium methanesulfonate (NaMS), 0.37 ± 0.01 for calcium methanesulfonate, and 0.47 ± 0.02 for potassium methanesulfonate, respectively. In addition, we explored the effect of NaMS on the CCN activities of NaCl and synthetic sea salt. It was found that if presented with a mass ratio of 1:1, NaMS would significantly reduce the CCN activities of NaCl and sea salt, and the κ values of binary mixtures could be estimated using the simple mixing rule. Nevertheless, if only presented with a mass ratio of 1:10 (an environmentally relevant value), the effect of NaMS on the CCN activities of NaCl and sea salt was found to be small. Overall, we conclude that from our experimental data and its levels found in the troposphere, methanesulfonate may only have minor impacts on the CCN activity of marine aerosol.
Rice paddy fields pose a high risk of water pollutions for the surrounding waterbodies through surface runoff and subsurface fluxes. Compared to surface runoff, subsurface flux from rice paddy fields has received less attention and is still poorly quantified, mainly due to low-frequency measurements at field scale and limited modeling capability at regional scale. Here we proposed a simplified modeling approach to estimate the subsurface fluxes of water, nitrogen (N) and phosphorus (P) from rice paddy fields and examined their relative importance compared to surface runoff. This model was established based on the high-frequency field measurements over two rice growing seasons in central China and the extended datasets across the East Asia. Two-year site-based observations indicate the significance of subsurface fluxes of water (737–785 mm season−1), N (28.5–40.0 kg N ha−1) and P (0.7–4.3 kg P ha−1) compared to those of surface runoff (178–199 mm season−1, 4.5–12.9 kg N ha−1, 0.5–2.6 kg P ha−1). Our regional estimations in the East Asia reveal that subsurface fluxes from rice paddy fields were comparable with surface fluxes, primarily controlled by the magnitude of seasonal precipitation. Subsurface fluxes were the dominant pathway of nutrient losses in drier rice cropping areas, while surface runoff was the more important process in wetter areas. In the light of the regional differences, we suggest that a spatially flexible set of policies for mitigating nutrient losses from rice paddy fields would be beneficial for the future water-quality improvements in the surrounding waterbodies.
Current estimates of China’s ammonia (NH3) volatilization from paddy rice differ by more than twofold, mainly due to inappropriate application of chamber-based measurements and improper assumptions within process-based models. Here, we improved the Jayaweera-Mikkelsen (JM) model through multiplying the concentration of aqueous NH3 in ponded water by an activity coefficient that was determined based on high-frequency flux observations at Jingzhou station in Central China. We found that the improved JM model could reproduce the dynamics of observed NH3 flux (R2 = 0.83, n = 228, P < 0.001), while the original JM model without the consideration of activity of aqueous NH3 overstated NH3 flux by 54% during the periods of fertilization and pesticide application. The validity of the improved JM model was supported by a mass-balance-based indirect estimate at Jingzhou station and the independent flux observations from the other five stations across China. The NH3 volatilization losses that were further simulated by the improved JM model forced by actual wind speed were in general a half less than previous chamber-based estimates at six stations. Difference in wind speed between the inside and outside of the chamber and insufficient sampling frequency were identified as the primary and secondary causes for the overestimation in chamber-based estimations, respectively. Together, our findings suggest that an in-depth understanding of NH3 transfer process and its robust representation in models are critical for developing regional emission inventories and practical mitigation strategies of NH3.
Cs2AgBiBr6 having a double perovskite structure is expected to achieve non-lead and stable optoelectronic devices, and has received wide attention recently. A strategy for improving of perovskite films via Rubidium cation (Rb+) is for the first time reported. When Rb+ was incorporated into Cs2AgBiBr6 to form (Cs1-xRbx)(2)AgBiBr6, the absorption at long wavelength was enhanced and the density of defect state was reduced without changing the crystal lattice. Furthermore, the mechanism of Rb+ doping to improve double perovskites and the optimal doping ratio was studied in this report. The average power conversion efficiency of doped devices is nearly 15% higher than that of standard devices from 20 devices of each group. Moreover, in the champion device, the power conversion efficiency achieved 1.52% with a high fill factory of 0.788.
The Ambisonic technique has been widely used for soundfield recording and reproduction recently. However, the basicAmbisonic decoding method will break down when the play-back loudspeakers distribute unevenly. Various methods havebeen proposed to solve this problem. This paper introducesseveral improvements to a recently proposed Ambisonic de-coding method, the matching projection method, for unevenloudspeaker layouts. The first improvement is energy preserv-ing; the second is introducing the “in-phase” weight, and thethird is introducing partial projection coefficients. To eval-uate the improved method, we compared it with the origi-nal one and the all-round Ambisonic decoding method witha 2-dimension unevenly arranged loudspeaker array. The re-sult shows our method greatly improves the original methodwhere the loudspeaker arranges very sparsely or densely.
This paper analyzes the determinants of stock market participation decisions using officially compiled aggregate stock account opening data in China. Different from the literature that often focuses on one particular dimension, our paper systematically evaluates the relative importance of disposable income, demographic variables, macroeconomic factors, stock market conditions, and social communication on both the level and the change of the participation rate. We find that the level of the participation rate is predominately determined by the income factor, followed by various measures of social communication. Social communication plays the most important role in the change of the participation rate, acting as a multiplier to stimulate stock market participation. The effects are more pronounced in high income, high education, high population density groups, and during the bull market period.
Soil archaea plays a vital role in the functioning of dryland ecosystems, which are expected to expand and get drier in the future as a result of climate change. However, compared with bacteria and fungi, the impacts of increasing aridity on archaea in these ecosystems remain largely unknown. Here, soil samples were collected along a typical aridity gradient in semi-arid regions in Inner Mongolia, China, to investigate whether and how the increasing aridity affects archaeal communities. The results showed that archaeal richness linearly decreased with increasing aridity. After partialling out the effects of soil properties based on partial least squares regression, the significant aridity-richness relationship vanished. The composition of archaeal communities was distributed according to the aridity gradient. These variations were largely driven by the changes in the relative abundance of Thaumarchaeota, Euryarchaeota and unclassified phyla. Niche-based processes were predominant in structuring the observed archaeal aridity-related pattern. The structural equation models further showed that aridity indirectly reduced archaeal richness through improving soil electrical conductivity (EC) and structured community composition by changing soil total nitrogen (TN). These results suggested that soil salinization and N-losses might be important mechanisms underlying the increasing aridity-induced alterations in archaeal communities, and highlighted the importance of soil niches in mediating the indirect impacts of increasing aridity on archaea.
The electron-transporting materials (ETMs) with excellent electron injection (EI) and electron transporting properties are prerequisites for highly efficient organic light-emitting diodes (OLEDs). In this work, we report a novel ETM, 2,7-di([3,2 `:6 `,3 `'-terpyridin]-4 `-yl)-9,9 `-spirobifluorene (27-mTPSF), which is synthesized by combining electron-withdrawing terpyridine (TPY) moieties with rigid twisted spirobifluorene. This rigid twisted structure helps to maintain the morphological stability of the amorphous film and contributes to the enhancement of the device lifetime. The nitrogen atom at the meta-position on the peripheral pyridine in 27-mTPSF can enhance the horizontal molecular orientation and the electron-transporting property. A green phosphorescent OLED (PhOLED) based on tris[2-(p-tolyl)pyridine]iridium(iii) (Ir(mppy)(3)) as the emitter and 27-mTPSF as ETM displayed a maximum external quantum efficiency (EQE) of 23.1%, and a half-life (T-50) of 77, 4330 and 243 495 h at an initial luminance of 10 000, 1000 and 100 cd m(-2), respectively, which are significantly superior to those of the device based on the conventional ETM 1,3,5-tris(N-phenylbenzimid azol-2-yl-benzene (TPBi). These results indicate a potential application for the ``(A)(n)-D-(A)(n)'' structured terpyridine ETMs.
The electron-transporting materials (ETMs) with excellent electron injection (EI) and electron transporting properties are prerequisites for highly efficient organic light-emitting diodes (OLEDs). In this work, we report a novel ETM, 2,7-di([3,2 `:6 `,3 `'-terpyridin]-4 `-yl)-9,9 `-spirobifluorene (27-mTPSF), which is synthesized by combining electron-withdrawing terpyridine (TPY) moieties with rigid twisted spirobifluorene. This rigid twisted structure helps to maintain the morphological stability of the amorphous film and contributes to the enhancement of the device lifetime. The nitrogen atom at the meta-position on the peripheral pyridine in 27-mTPSF can enhance the horizontal molecular orientation and the electron-transporting property. A green phosphorescent OLED (PhOLED) based on tris[2-(p-tolyl)pyridine]iridium(iii) (Ir(mppy)(3)) as the emitter and 27-mTPSF as ETM displayed a maximum external quantum efficiency (EQE) of 23.1%, and a half-life (T-50) of 77, 4330 and 243 495 h at an initial luminance of 10 000, 1000 and 100 cd m(-2), respectively, which are significantly superior to those of the device based on the conventional ETM 1,3,5-tris(N-phenylbenzimid azol-2-yl-benzene (TPBi). These results indicate a potential application for the ``(A)(n)-D-(A)(n)'' structured terpyridine ETMs.