Emission and environmental distribution of decabromodiphenyl ethane (DBDPE) in China from 2006 to 2026: Retrospection, forecasting, and implications for assessment and management

Citation:

Chen A, Chen C, Zhang S, Li L, Zhang Z, Chen J, Jing Q, Liu* J. Emission and environmental distribution of decabromodiphenyl ethane (DBDPE) in China from 2006 to 2026: Retrospection, forecasting, and implications for assessment and management. Environmental Pollution [Internet]. 2023;327.

摘要:

Decabromodiphenyl ethane (DBDPE) is the main alternative to decabromodiphenyl ether (deca-BDE) in commercial use. However, there is increasing evidence show that DBDPE is a potential persistent organic pollutant, and it has been found ubiquitously in environmental media across China in recent years. Monitoring studies have not been able to determine the overall levels and temporal trends of DBDPE contamination in China, and have been unable to explain how emission patterns can affect their environmental distribution. Therefore, this study estimated the temporal variance of DBDPE emissions and environmental concentrations in five regions of China from 2006 to 2026 using the PROduction-To-EXposure (PROTEX) mass balance model. The results showed that Guangdong Province was the greatest DBDPE pollution hotspot in China due to emissions from plastics manufacturing and e-waste disposal; there was also severe pollution in Shandong Province, where almost all the DBDPE in China is produced. The DBDPE concentrations in indoor and outdoor environments increased substantially in all regions during 2006–2021. Furthermore, in Guangdong Province and Shandong Province, the ratio of indoor/outdoor air concentrations was greater than or close to 1, indicative of significant outdoor emission sources of DBDPE. In contrast, the ratios for the Beijing–Tianjin–Hebei region, East China, and Southwest China were below 1 due to the indoor use of electronic equipment containing DBDPE. The temporal trends of these ratios indicated that DBDPE contamination has gradually spread from high-concentration environments with strong emission sources to low-concentration environments. The outcomes of this study have important implications for the risk assessment of DBDPE use in China and can be used to establish contamination-mitigation actions.

访问链接

成果类型

期刊论文 (33)

成果概览

2024 (3)
2023 (3)
2022 (3)
2021 (1)
2020 (1)
2019 (3)
2018 (1)
2017 (2)
2016 (4)
2015 (5)

最新科研成果

Chen C, Li L, Zhang S, Liu* J, Wania* F. Modeling Global Environmental Fate and Quantifying Global Source–Receptor Relationships of Short-, Medium-, and Long-Chain Chlorinated Paraffins. Environmental Science & Technology Letters [Internet]. 2024;11(6):626-633. 访问链接

刘俊宙，陈嘉喆，景侨楠，张少轩，陈安娜，陆蓉静，刘建国*. 塑料中高关注物质（SVHCs）的赋存分布、物质流及环境释放研究进展. 环境科学. 2024.Abstract

各类塑料制品中广泛分布的塑料添加剂赋予塑料以阻燃、增塑和抗氧化等优异功能，但其中已有100多种因其潜在的环境和健康危害性被列入欧盟高关注物质（SVHCs）候选清单.以上SVHCs普遍分布在各类塑料及各行业产品中，比较集中分布在PVC和PUR等类塑料和包装、汽车、建材、电子电器和纺织等行业中.在不同功能的SVHCs中，增塑剂和阻燃剂用量最高，品类相对集中，一直是国内外化学品风险评估和风险管理关注的重点.现有研究已建立起塑料制品中SVHCs物质流分析方法，揭示出PBDEs、HBCD和PAEs等典型阻燃剂和增塑剂类SVHCs在塑料制品全生命周期普遍存在的环境和健康风险；大量SVHCs随塑料产品寿命终结进入废物阶段，揭示了各类含SVHCs塑料废物环境无害化管理的重要性.除在产品使用周期发生的环境释放外，各种形式的塑料泄露所产生的塑料碎片，构成了环境中各种SVHCs的长期释放源，对生态环境和人体健康造成持久威胁.未来亟需重视各类塑料制品中大量潜在有害化学品的识别及其全生命周期环境释放与风险评估研究，尤其包括塑料中有害化学品排放系数测算、动态物质流分析方法的优化，以及塑料泄露途径有害化学品释放机制研究等.

Chen J, Zhang S, Xu W, Chen C, Chen A, Lu R, Jing Q, Liu* J. Exploring long-term global environmental impacts of chlorinated paraffins (CPs) in waste: Implications for the Stockholm and Basel Conventions and the global plastic treaty. Environment International [Internet]. 2024;185:108527. 访问链接 Abstract

Chlorinated paraffins (CPs), mainly short-chain CPs (SCCPs) and medium-chain CPs (MCCPs), are currently the most produced and used industrial chemicals related to persistent organic pollutants (POPs) globally. These chemicals are widely detected in the environment and in the human body. As the release of SCCPs and MCCPs from products represents only a small fraction of their stock in products, the potential long-term release of CPs from a large variety of products at the waste stage has become an issue of great concern. The results of this study showed that, by 2050, SCCPs and MCCPs used between 2000 and 2021 will cumulatively generate 226.49 Mt of CP-containing wastes, comprising 8610.13 kt of SCCPs and MCCPs. Approximately 79.72 Mt of CP-containing wastes is predicted to be generated abroad through the international trade of products using SCCPs and MCCPs. The magnitude, distribution, and growth of CP-containing wastes subject to environmentally sound disposal will depend largely on the relevant provisions of the Stockholm and Basel Conventions and the forthcoming global plastic treaty. According to multiple scenarios synthesizing the provisions of the three conventions, 26.6–101.1 Mt of CP-containing wastes will be subject to environmentally sound disposal as POP wastes, which would pose a great challenge to the waste disposal capacity of China, as well as for countries importing CP-containing products. The additional 5-year exemption period for MCCPs is expected to see an additional 10 Mt of CP-containing wastes subject to environmentally sound disposal. Thus, there is an urgent need to strengthen the Stockholm and Basel Conventions and the global plastic treaty.