A process of fabricating a seven layer microfluidic chip using CO2 laser processing and hot bonding technology is presented. The applied polymer substrates were poly(methyl-methacrylate) (PMMA), polycarbonate (PC), polystyrene (PS) and polyethylene terephthalate (PET). The results show the optimal combination of polymer substrates for the seven layer microfluidic chip at the hot bonding parameters of bonding temperature of 100 degrees C and bonding pressure of 1 MPa for maintaining times of nine minutes. Due to the different properties of the polymer substrates, the profile of the microchannel in the different polymer sheets for the same CO2 laser processing parameters. The maximum tensile strength of the microfluidic was measured as 1.0 MPa. The combined polymers with the minimum binding force were PC and PMMA. At the end, a mixing experiment was performed in the seven layer microfluidic chip with different fluid Re numbers.
Two-dimensional (2D) metallic transition metal dichalcogenides (MTMDCs), the complement of 2D semiconducting TMDCs, have attracted extensive attentions in recent years because of their versatile properties such as superconductivity, charge density wave, and magnetism. To promote the investigations of their fantastic properties and broad applications, the preparation of large-area, high-quality, and thickness-tunable 2D MTMDCs has become a very urgent topic and great efforts have been made. This topical review therefore focuses on the introduction of the recent achievements for the controllable syntheses of 2D MTMDCs (VS2, VSe2, TaS2, TaSe2, NbS2, NbSe2, etc). To begin with, some earlier developed routes such as chemical vapor transport, mechanical/chemical exfoliation, as well as molecular beam epitaxy methods are briefly introduced. Secondly, the scalable chemical vapor deposition methods involved with two sorts of metal-based feedstocks, including transition metal chlorides and transition metal oxidations mixed with alkali halides, are discussed separately. Finally, challenges for the syntheses of high-quality 2D MTMDCs are discussed and the future research directions in the related fields are proposed.
In this study, we propose a novel strategy, plasma activated water (PAW) to reduce pesticide residues on agricultural products. To validate its feasibility and effectiveness, we employee high-performance liquid chromatography (HPLC) to detect phoxim on grapes. HPLC results suggest that the reduction of phoxim on grapes achieve 73.60% after treated 10 min by PAW prepared 30 min, and the concentration of phoxim decreased significantly (p < 0.05) with the preparation time of PAW. Furthermore, HPLC-MS analysis shows that the reduction effect of phoxim by PAW is dominated by the degradation of phoxim. Combined with analyzing the physicochemical properties of PAW, one possible degradation pathway is proposed under the present experimental conditions, mediated by reactive oxygen and nitrogen species. The acidic environment (pH < 3) and high oxidation capacity (ORP > 500 mV) are suggested to be a benefit to the reduction of phoxim. Besides, the experimental results regarding color, firmness, sugar, vitamin C, and superoxide dismutase of grapes demonstrate that the PAW treatment will not significantly affect the quality of grapes. In conclusion, phoxim pesticide residues on grapes could be effectively reduced by the PAW strategy and without a significant (p < 0.05) effect on grapes quality.
Reductive immobilization of radioactive pertechnetate (99TcO4−) in simulated groundwater was studied by prepared carboxymethyl cellulose (CMC) and starch stabilized zero valent iron nanoparticles (nZVI), and long-term remobilization of reduced Tc was also evaluated under anoxic and oxic conditions. The stabilized nZVI can effectively reduce soluble 99Tc(VII) to insoluble 99Tc(IV), and they can be easily delivered into a contaminated groundwater zone and facilitate in situ remediation. In this study, CMC-stabilized nZVI showed higher reactivity than that using starch as the stabilizer. Batch experiments indicated that more than 99% of 99Tc(VII) (C0=12mg/mL) was reduced and removed from groundwater by CMC-stabilized nZVI with a CMC content of 0.2% (w/w) at a broad pH of 5–8. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses further confirmed that 99Tc(VII)O4− transformed into 99Tc(IV)O2 (s). The presence of bicarbonate exhibited insignificant effect on Tc immobilization, while humic acid (HA) inhibited reaction mainly due to retardation on electron transfer and formation of Tc(IV)-HA complexes. More interesting, the immobilized Tc(IV) remained insoluble even after 120 d under anoxic condition, while only ∼21% was remobilized when exposed to air. Therefore, bio-macromolecules stabilized nZVI nanoparticles could be a viable alternative for in situ remediation of radioactive contamination in groundwater.