Abstract Thermal radiation from a black body increases with the fourth power of absolute temperature (T4), an effect known as the Stefan–Boltzmann law. Typical materials radiate heat at a portion of this limit, where the portion, called integrated emissivity (εint), is insensitive to temperature (|dεint/dT| ≈ 10-4 °C–1). The resultant radiance bound by the T4 law limits the ability to regulate radiative heat. Here, an unusual material platform is shown in which εint can be engineered to decrease in an arbitrary manner near room temperature (|dεint/dT| ≈ 8 × 10-3 °C–1), enabling unprecedented manipulation of infrared radiation. As an example, εint is programmed to vary with temperature as the inverse of T4, precisely counteracting the T4 dependence; hence, thermal radiance from the surface becomes temperature-independent, allowing the fabrication of flexible and power-free infrared camouflage with unique advantage in performance stability. The structure is based on thin films of tungsten-doped vanadium dioxide where the tungsten fraction is judiciously graded across a thickness less than the skin depth of electromagnetic screening.
Black carbon (BC) emissions from the Canadian oil sand (OS) surface mining facilities in Alberta were investigated using aircraft measurements. BC emission rates were derived with a top-down mass balance approach and were found to be linearly related to the volume of oil sand ore mined at each facility. Two emission factors were determined from the measurements; production-based BC emission factors were in the range of 0.6-1.7 g/tonne mined OS ore, whereas fuel-based BC emission factors were between 95 and 190 mg/kg-fuel, depending upon the facility. The annual BC emission, at 707 +/- 117 tonnes/year for the facilities, was determined using the production-based emission factors and annual production data. Although this annual emission is in reasonable agreement with the BC annual emissions reported in the latest version of the Canadian national BC inventory (within 16%), the relative split between off-road diesel and stack sources is significantly different between the measurements and the inventory. This measurement evidence highlights the fact that the stack sources of BC may be overestimated and the off-road diesel sources may be underestimated in the inventory and points to the need for improved BC emission data from diesel sources within facilities.
Topological semimetals (TSMs) refer to electronic gapless phases that exhibit topological band crossings around the Fermi level and have intrigued enormous research interest in the past few decades. There have been many theoretical and experimental progresses regarding TSMs, and first-principles calculations have been proven to be an instrumental tool in finding candidate materials for TSMs. In this tutorial, we will focus on two representative types of TSMs—Weyl and Dirac semimetals and summarize the recent progress from the perspective of first-principles calculations. First of all, the basic concepts of TSMs, the generic topological invariants, and the frequently used techniques within first-principles calculations are briefly introduced. Second, taking typical materials as representative examples, we summarize the characteristic electronic properties, formation mechanisms, and general methodologies for Weyl and Dirac semimetals, respectively. In the last part, we present a short review of recent progresses on other types of TSMs.